RSS گلند کابل ضدانفجار آرمور دار
Application
Outdoor or indoor use.
For use with braid armoured marine shipboard jacketed or non-jacketed cable.
جهت صنایع دریایی و کشتیرانی
Features
Provides a barrier seal between the individual insulated conductors within the cable and prevents entry of the products of an explosion into the cable.
Assembly of the cable gland/connector compresses and distributes the compound evenly to effect a barrier seal at the point of entry into the enclosure.
Provides an outer deluge seal to prevent moisture ingress to the cable armour and enclosure. Deluge seal is coloured red to indicate hazardous locations product.
Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer jacket.
Materials & Finishes
The 753 cable gland/connector is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminum. Brass NPT entries are nickel plated as standard.
Category: Cable Glands
Product code: R753
5 stars, based on 1 reviews
CABLE GLAND/CONNECTOR SELECTION TABLE | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size Ref. |
Entry Thread Size |
Cable Acceptance Details |
‘G’ Compressed Length |
Hexagon Dimensions |
||||||||
Inner Sheath/Cores |
‘B’ Outer Jacket |
‘C’ | ||||||||||
NPT |
Metric * |
‘D’ Max. Over Cores |
‘E’ Max. Inner Jacket |
Max. No. Of Cores |
Across Flats |
Across Corners |
||||||
Standard | Option | Min. | Max. | Braid | ||||||||
Os | ½" | - | M20 ‡ | 0.35" | 0.46" | 6 | 0.22" | 0.47" | 0.008" / 0.013" | 2.61" | 0.94" | 1.09" |
O | ½" | - | M20 ‡ | 0.35" | 0.46" | 6 | 0.37" | 0.63" | 0.008" / 0.013" | 2.61" | 0.94" | 1.09" |
A | ½" | ¾" | M20 | 0.43" | 0.49" | 10 | 0.49" | 0.81" | 0.008" / 0.013" | 2.65" | 1.18" | 1.36" |
B | ¾" | 1" | M25 | 0.64" | 0.72" | 21 | 0.66" | 1.02" | 0.008" / 0.013" | 2.75" | 1.42" | 1.64" |
C | 1" | 1¼" | M32 | 0.86" | 0.97" | 42 | 0.87" | 1.30" | 0.008" / 0.013" | 2.93" | 1.81" | 2.09" |
C2 | 1¼" | 1½" | M40 | 1.04" | 1.16" | 60 | 1.10" | 1.61" | 0.008" / 0.013" | 3.15" | 2.17" | 2.50" |
D | 2" | 1½" | M50 | 1.46" | 1.64" | 80 | 1.42" | 2.07" | 0.008" / 0.013" | 3.14" | 2.56" | 2.96" |
E | 2½" | 2" | M63 | 1.88" | 2.11" | 100 | 1.81" | 2.57" | 0.008" / 0.013" | 3.42" | 3.15" | 3.64" |
F | 3" | 2½" | M75 | 2.32" | 2.61"/2.57" † | 120 | 2.24" | 3.07" | 0.008" / 0.013" | 3.61" | 3.74" | 4.31" |
H†† | 3½" | - | M90 | 2.79" | 3.05" | 120 | 3.07" | 3.52" | 0.008" / 0.013" | 3.54" | 4.18" | 4.84" |
All dimensions in inches (except*). Os - F size metric entry threads are 1.5mm pitch as standard with 15mm length of thread. For H size cable glands, a 2mm pitch is supplied as standard with a 20mm length of thread (1.5mm pitch with 15mm length of thread can be supplied) please specify when ordering. † Smaller value is applicable when selecting the standard NPT entry thread. ‡Sizes Os and O are available with an M16 thread size. For O size with M16 thread, the maximum cable inner jacket diameter is 0.43". †† UL approved only. |