RSS گلند کابل ضدانفجار آرمور دار
Application
Mining.
For use with single wire armour ‘W’, wire braid ‘X’ and steel tape armour ‘Z’ elastomer and plastic insulated cables.
For particular use with cables that exhibit ‘cold flow’ characteristics.
Features
Provides armour clamping using one clamping arrangement for all armour/braid types.
Provides a diaphragm seal on the cables inner sheath which will not damage cable that has ‘cold flow’ characteristics.
Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath.
Materials & Finishes
The 453/Universal cable gland is manufactured in Brass (standard), Nickel Plated Brass or 316 Stainless Steel. Brass NPT entries are nickel plated as standard.
Category: Cable Glands
Product code: R453/Universal
5 stars, based on 1 reviews
CABLE GLAND SELECTION TABLE | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size Ref. |
Entry Thread Size |
Cable Acceptance Details |
‘G’ Compressed Length |
Hexagon Dimensions |
||||||||
Inner Sheath ‘A’ |
Outer Sheath ‘B’ |
‘C’ Armour/Braid |
||||||||||
Metric |
NPT * |
Across Flats |
Across Corners |
|||||||||
Standard | Option | Min. | Max. | Min. | Max. |
Orientation 1 |
Orientation 2 |
|||||
Os | M20 | ½" | - | 3.5 | 8.1 | 5.5 | 12.0 | 0.8 / 1.25 | 0 / 0.8 | 61.6 | 24.0 | 26.5 |
O | M20 | ½" | - | 6.5 | 11.5 | 9.5 | 16.0 | 0.8 / 1.25 | 0 / 0.8 | 61.6 | 24.0 | 26.5 |
A | M20 | ¾" | ½" | 8.4 | 14.3 | 12.5 | 20.5 | 0.8 / 1.25 | 0 / 0.8 | 63.0 | 30.0 | 32.5 |
B | M25 | 1" | ¾" | 11.1 | 19.7 | 16.9 | 26.0 | 1.25 / 1.6 | 0 / 0.7 | 69.9 | 36.0 | 39.5 |
C | M32 | 1¼" | 1" | 17.6 | 26.5 | 22.0 | 33.0 | 1.6 / 2.0 | 0 / 0.7 | 73.2 | 46.0 | 50.5 |
C2 | M40 | 1½" | 1¼" | 23.1 | 32.5 | 28.0 | 41.0 | 1.6 / 2.0 | 0 / 0.7 | 77.9 | 55.0 | 60.6 |
D | M50 | 2" | 1½" | 28.9 | 44.4/42.3 † | 36.0 | 52.6 | 1.8 / 2.5 | 0 / 1.0 | 93.5 | 65.0 | 70.8 |
E | M63 | 2½" | 2" | 39.9 | 56.3/54.3 † | 46.0 | 65.3 | 1.8 / 2.5 | 0 / 1.0 | 94.0 | 80.0 | 88.0 |
F | M75 | 3" | 2½" | 50.5 | 68.2/65.3 † | 57.0 | 78.0 | 1.8 / 2.5 | 0 / 1.0 | 101.0 | 95.0 | 104.0 |
All dimensions in millimetres (except * where dimensions are in inches). Metric entry threads are 1.5mm pitch as standard. † Smaller value is applicable when selecting reduced NPT entry option. |